0086-025 -68618183
No. 31, Wutai Road, Dongba Town, Gaochun Dist., Nanjing, Jiangsu, China (Mainland)
Advantages
1. None-halogen property makes the materials non-toxic when burning;
2. It has excellent flame retardancy, good physical and mechanical properties and processing performance;
3. Heat resistance level is 125℃, can pass the VD-1 combustion test.
Technical Data Sheet
Item | Unit | Test method | Typical value | |
Density@23℃ | g/cm³ | ASTM D792 | ≤1.42 | |
Tensile strength | MPa | IEC60811-1-1 | 14.2 | |
Elongation at break | % | 175 | ||
After aging @150℃, 168h | Tensile strength retention | % | IEC60811-1-2 | 105 |
Breaking elongation retention | % | 88 | ||
After aging @185℃, 100h | Tensile strength variation | % | IEC60811-1-2 | 95 |
Breaking elongation variation | % | 75 | ||
Hot prolongation@200℃, 0.2MPa, 15min | Elongation under the load | % | IEC60811-2-1 | 35-45 |
Permanent deformation | % | 0 | ||
Low temperature bending test@-40℃, 16h | — | IEC60811-1-4 | No crack | |
Combustion test | — | IEC 60332-1 | VD-1 | |
The halogen acid gas content | mg/g | IEC 60754-1 | none | |
pH | — | IEC 60754-2 | 5 | |
Electrical conductivity | µS/mm | IEC 60754-2 | 3.8 | |
Dielectric strength@20℃ | MV/mm | IEC 60243-1 | 20 | |
Volume resistivity@20℃ | Ω·cm | ASTM D257 | 5×1013 | |
Hardness | Shore A | ASTM D2240 | 93 | |
The irradiation condition: hot prolongation(25% to 40%) | % | — | 35-45 | |
Processing
Recommend to use conventional single screw extruder and specific low smoke halogen-free screw.
Zone | 1 | 2 | 3 | 4 | 5 | 6 | Neck | Head |
Temperature Range℃ | 135 | 145 | 150 | 155 | 160 | 165 | 170 | 170 |
1. Well-selected Raw Materials(Raw materials just like the fudation of the buildings. Quality raw materials makes qualified product.)
2. Advanced Production line(Strict quality assurance processes)
3. Advanced test equipment(Data proves the facts)
4. Certificate of analysis
We take an active part in every trade show.
1. Keep at room temperature;
2. Storage environment should be clean, dry and ventilated;
3. Best use within six months from the date of production;
4. Please dry it after a long-time opening.
Your satisfaction is our enternal pursuit.
If there's anything we can do for you, Please feel free to contact me.
Christina
Mobile/Whatsapp: 0086
